Medium frequency furnace transformer
The ZS and ZSS series medium frequency furnace transformers produced by our company have the advantages of energy saving effect, low consumption, low noise, strong impact resistance and short circuit resistance, high overload capacity, and reliable power supply for harmonic prevention.
Safe and reliable
Well-made
After-sales worry-free
Quality Assurance
Classification:
Special Transformer
Telephone:86-371-63719330
Product Introduction
The ZS and ZSS series medium frequency furnace transformers produced by our company have the advantages of energy saving effect, low consumption, low noise, strong impact resistance and short circuit resistance, high overload capacity, and reliable power supply for harmonic prevention.
The product is used exclusively for medium frequency electric furnaces below 30. The rated voltage on the primary side can be divided into 10KV or 35KV. The rated voltage on the secondary side can be divided into 400V, 600V, 660V, 690V, 700V, 720V, 750V, 800V, 850V, 900V, 950V, 1000V, 1050V, 1100V, 1250V, etc. The rectification mode can be divided into 6 pulse waves, 12 pulse waves, 24 pulse waves or more. Using the current popular rectifier string, inverter string, rectifier, etc.
Medium frequency furnace transformer product advantages
Energy saving, high efficiency and environmental protection: power transformer is the key electrical equipment for power transmission, and the self consumption of transformer accounts for 30% ~ 40% of the power grid loss. 12 pulse medium frequency furnace transformer on the one hand, effectively reduce the operation of energy consumption and noise
2. Anti-harmonic: The 12-pulse transformer has the effect of eliminating all harmonics of the network side winding. The product combines the load characteristics, power grid voltage fluctuation and atmospheric overvoltage, and determines the reasonableness according to the load condition of the rectifier transformer.
3. Small heat, strong overload capacity: in the production and materials of special transformers for medium frequency furnaces, through accurate calculation of technical parameters, high quality silicon steel sheets with high permeability and low loss are selected to make iron cores and wires, and the proportion of copper and iron is determined by scientific methods to ensure that the transformer has low no-load loss and low noise performance from the raw materials.
4. Anti-short circuit: 12 pulse wave medium frequency furnace transformer standard design, pay attention to the axial deposit process of coil manufacturing, carry out short circuit test before each equipment leaves the factory to prevent problems before they occur, and use reliable relay protection and automatic reclosing system at the same time to ensure safe, stable and lasting use of users and high overload transformer before closing.
Medium frequency furnace transformer technical parameters
|
Model |
Intermediate Frequency Furnace (ton) |
regular transformer capacity (kVA) |
|
ZSS11-250/10 |
0.5 |
500 |
|
ZSS11-315/10 |
0.5-0.75 |
630 |
|
7SS11-400/10 |
0.75-1.0 |
800 |
|
ZSS11-500/10 |
1.0-1.25 |
1000 |
|
ZSS11-630/10 |
1.25-1.5 |
1250 |
|
ZsS11-800/10 |
1.5-2.0 |
1600 |
|
ZSS11-1000/10 |
2.0-2.5 |
2000 |
|
ZSS11-1250/10 |
2.5-3.0 |
2500 |
|
ZSS11-1600/10 |
3.0 |
3150 |
|
ZSS11-2000/10 |
4.0 |
3500 |
|
ZSS11-2500/10 |
5.0 |
4000 |
Key words:
Medium frequency furnace transformer
Related Products
Related Products
Product Consulting